Built upon Eletech’s proprietary CVSD technology, the QuikVoice boards provide low cost solutions to applications where voice grade audio output is sufficient. However, if higher audio quality is needed, the QuikWave boards should be considered instead.

Depending on the particular model, the sound segments are stored in either EPROM chips or flash memory. EPROM models offer slightly better sound quality, while flash models offer user recordability. EPROM models are recommended for applications where messages will rarely or never be changed. Flash models are recommended for applications where messages must be recorded by end users or changed frequently.

For EPROM based (playback only) models, VP880 QuikVoice Development System must be used for sound development. VP880 is a PC based sound digitization, editing and management system. After the sound is developed, it is programmed into EPROM chips with a standard EPROM programmer. Eletech also provides sound development and programming service to customers who do not want to do it themselves.

QuikVoice sound boards are totally self contained. Multiple sound segments can be activated by push buttons, motion sensors or micro-controllers. The audio output can drive a speaker directly or be amplified externally. Some models offer a BUSY output signal which can be used to turn on/off an external device such as a motor or a lamp. Thanks to their on-board intelligent microprocessors, some QuikVoice boards can be customized to operate differently. Please contact us for your specific requirements.

Features
All features are not applicable to all models

*  Voice grade audio record and/or playback
*  Stand alone operation
*  Activated by push button, relay, motion sensor or micro-controller
*  Use EPROM chips or flash memory for storage - no battery backup needed
*  Single or multiple sound segments capability
*  Built-in power amplifier
*  Compact size and low cost

Applications

*  Exhibits, displays and attractions
*  Message repeaters
*  Gaming, vending and amusement equipment
*  Industrial controls
*  Security alarms
*  Elevator announcement

Selection Guide

Model Number	EM4000B	DM1000B	DM1000LS	VM1410A	VM420E1	VM1608
Output Channel	mono	mono	mono	mono	mono	dual
Operation Mode	mono	play	play	play	play	play
Control Interface	mono	1 direct input	1 direct   input	10 direct inputs	binary code	binary code
Max. # of Segments	8	1	1	10	128	128
Memory Type	Flash	EPROM	EPROM	EPROM	EPROM	EPROM
Max. Total Time	8 minutes	4 minutes	4 minutes	8.5 minutes	33 minutes	8.5 minutes
Supply Voltage	10~32 VDC	9~12 VDC	6 or 9~12 VDC	6 or 9~12 VDC	6 or 9~12 VDC	6 or 9~12 VDC
Low Power	no	no	yes	yes	no	no
Output Power	40W	1.5W	1W	1W	1W	1W
Dimensions	4.8”x6.0”x1.7”	2.5” x 3.0”	3.0” x 4.7”	3.0” x 4.7”	3.8” x 7.6”	3.7” x 5.0”

Options
All options are not applicable to all models

*  EPROM chips
*  Power supply
*  Enclosure
*  Speaker
*  Motion Sensor
*  Push Buttons

Demo Messages
The following messages demonstrate EPROM based QuikVoice sound boards at different sampling rates.

*  32 Kbps Demo (recommended for male voice)
*  48 Kbps Demo (recommended for female voice)

QuikVoice^TM Digital Sound Boards

Home > Products > Audio Players > QuikVoice Boards